Adtech ADT-DK300A, Руководство производителя

Страница: 98 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
89
031
InpAcceleration(mm/sec)
039
XBacklashExpiate(pulse)
Range : 1~200000, 1~200000, 1~8000, 1~200000
Unit : mm/min,mm/min,mm/sec,mm/min
Authority : Operation admin or higher
Default : 3000,200,1000,3000
Effective time : Instant
Note : The feeding instructions such as G01, G02 and G03 move at the speed of
F instruction. If the F instruction isn’t specified in the program, the
above instructions move at the speed set by this parameter. If the F
instruction is specified, this parameter will be invalid.
The maximum feeding speed restricts the F instruction during
processing, i.e. no matter what F is set, the actual speed can’t exceed
this parameter value. Setting this parameter will prevent the damage
caused by accidental speed programming error when transferring
processing files.
032
XBacklashExpiate(pulse)
033
YBacklashExpiate(pulse)
034
ZBacklashExpiate(pulse)
035
4BacklashExpiate(pulse)
Range : 1~20000
Unit : Pulse
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : 1. Compensate the clearance between control axis
2. Compensate with the pulse in minimum unit. The specific number
should be converted according to gear ratio. For example, the backlash
measured by the machine tool is 0.1mm and the gear ratio of the system
is CMR/CMD=1/1, the compensation pulses is p=0.1*1000*1/1=100.
036 ZeroReturn Mode
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0 (program)
Effective time : Instant