Adtech ADT-DK300A, Руководство производителя

Страница: 108 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
99
acceleration/deceleration, and this parameter is valid in preprocessing
mode.
084
HOME Check for alarm
085
HOME Check Enable
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0, 1
Effective time : Instant
Note : Used to set whether prompt user to reset under certain conditions,
ensuring that the user has performed the operation;
If the value is set to 0, it won’t check, and will run directly.
087 Default process plane
Range : G17,18,19
Unit : None
Authority : Operation admin or higher
Default : G18 (L series)/G17 (M series)
Effective time : Instant
Note : Set the default processing plane to XY or XZ; modify the default plane, so
that it isn’t need to specify the modal plane value while programming,
and write plane related instructions directly in stead;
089
IP address
090
Subnet mask
091
Default gateway
Range : 0~255
Unit : None
Authority : Operation admin or higher
Default : 192.168.0.123
255.255.255.0
192.168.0.1
Effective time : Restart
Note : Used to configure Ethernet parameters, which shall comply with the
actual network settings, or else it can’t be accessed normally.
After configured successfully, the user can perform the ping command