Adtech ADT-DK300A, Руководство производителя

Страница: 100 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
91
041
Wheel Coefficient
Range : 500~10000 100~3000
Unit : mm/min
Authority : Operation admin or higher
Default : 9000, 1000
Effective time : Instant
Note : Set handwheel speed and acceleration;
In handwheel mode, the maximum speed of handwheel movement
controlled by setting the maximum speed of the handwheel, wheel
coefficient is to control the acceleration of the wheel; if the machine
vibrates in handwheel mode, please adjust the two parameters to
smaller; however, the machine response will be slow if it is too small;
please adjust to the maximum value as long as there is no vibration;
042 M Code Delay time
Range : 0~9999
Unit : ms
Authority : Operation admin or higher
Default : 100
Effective time : Instant
Note : Set the waiting time (unit: ms) after executing M code
043
X HOME Offset(pulse)
044
Y HOME Offset(pulse)
045
Z HOME Offset(pulse)
046
4 HOME Offset(pulse)
Range : ‐ 9999~9999
Unit : mm
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : Set the compensation home offset after axis home operation.
First, complete the mechanical home operation, offset corresponding
pulse, and then set this point as mechanical home.
Note: This parameter is invalid during program home operation.
047 Line number