Adtech ADT-DK300A, Руководство производителя

Страница: 30 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
21
0
Caution
‹
The value entry dialog box has two input methods, i.e. direct assignment and increment
assignment. For direct assignment, the entered value is assigned to specified parameter directly;
for increment assignment, the entered value is added to specified parameter and then assigned
to the parameter;
‹
The increment input box and direct input box have a prompt symbol in the left respectively, ‘=’
indicates direct input, ‘+’ indicates increment input, and the default mode is direct assignment.
To change to increment assignment, press the “UP/DOWN” key
‹ The increment input is shown above, 1# compensation is ‐ 11.2, to add ‐ 0.4, the operation
follows: select 1# compensation, enter ‐ 0.4, and then press / to select the
mode, “+” is to add the new value to original value, and “=” is to replace with the new value
directly. Then, press to finish the modification of the compensation, as shown below.