Adtech ADT-DK300A, Руководство производителя

Страница: 107 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
98
can be configured by modifying this parameter. The setting method is
pressing the EOB key and selecting in the pop ‐ up dialog box, and press
and hold the EOB key for three seconds to exit. The black option
indicates home operation. You can press UP/DOWN key and Page
Up/Down key to select the home axis and stage.
077
Arc Acc.for Radii
078
Arc Acc.for Speed
Range : 10~100 10~10000
Unit : Coefficient
Authority : Operation admin or higher
Default : 50, 100
Effective time : Instant
Note : Used to restrict the arc processing speed automatically. This parameter
is valid in pretreatment mode.
The bigger the radius coefficient is, the lower the arc speed is.
The bigger the acceleration coefficient is, the higher the arc speed is.
079 PretreatmentCode Set
Range : 100~1000
Unit : Instruction line
Authority : Operation admin or higher
Default : 500
Effective time : Instant
Note : Set the pre ‐ reading instruction lines; if the pretreatment processing
pauses and pre ‐ reads, please increase this value to pre ‐ read more
instructions.
080
Inp AccSpeed Mode
081
'S'Speed Acceleration
Range : 0~1 1000~10000
Unit : None
Authority : Operation admin or higher
Default : 0, 5000
Effective time : Instant
Note : Used to set the performance of S curve acceleration/deceleration
The interpolation mode 0 is linear acceleration/deceleration, 1 is S