Adtech ADT-DK300A, Руководство производителя

Страница: 47 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
38
7.3 Editing & modifying programs
The program in CNC memory can be edited with NC keypad. In the main menu, press [Edit] to enter program edit interface
and edit the program in current work area (for loading program into work area, refer to section 8.2). The edit mode is
similar to notepad in Windows. Move the cursor directly to locate, press keys to enter, press [EOB] to change line, and
press [Delete] to delete the character where the cursor locates.
0
Caution
After all operations, press Reset to save the files, and the functions base on edit mode;
DK300A uses new file mapping technology, and allows loading processing files that exceed its memory. Therefore, to
ensure the system efficiency, you can only search and process, but can’t edit the processing files that exceed 2MB.
7.4 Deleting files
7.4.1. Deleting files in memory
Follow the step below to delete the programs in system memory:
Press [File] to enter file operation interface;
Follow the prompt on the screen, select the file and press [Delete] to confirm and delete the file.
0
Caution
If the program has been loaded into work area, you need to restart the system to delete the program, or else the system
will report error.
The programs loaded into the work area can’t be deleted, or else the system will report error.
8. Main interfaces of the system
8.1. Position interface
The position interface shows current machine tool coordinates, including absolute position, relative
position and comprehensive position. In the main interface, press [Monitor] to enter the position interface.
To enter position interface: