Adtech ADT-DK300A, Руководство производителя

Страница: 118 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
109
Note : Set pulse direction; if the controller direction is reverse to actual drive
direction, please modify this parameter to adjust the rotation direction
of motor.
037
X Ext Home ELevel
038
Y Ext Home ELevel
039
Z Ext Home ELevel
040
A Ext Home ELevel
Range : 0~1
Unit : LOGIC VOLTAGE LEVEL
Authority : Super Admin
Default : 0
Effective time : Instant
Note : Set the effective voltage level of external home sensor switch during
home operation.
Low level
High level
041
X Round Setting (restart)
042
Y Round Setting (restart)
043
Z Round Setting (restart)
044
4 Round Setting (restart)
Range : 0~9999999
Unit : Pulse
Authority : Super Admin
Default : 0
Effective time : Restart
Note :
¾
Round function is available on hardware version 1.5 or later only;
¾
This function is used to prevent the logic counting of axis
exceeding the maximum counting range (2147483648) and causing
overflow error;
¾
Generally, overflow occurs only when the axis is set to rotary. The
system will calculate the corresponding pulse limit according to the
gear ratio of current axis and assign to the ROUND parameter of
corresponding axis, if current axis is set to rotary and uses 360°
display mode after the system getting P2.062~P2.069 parameters.
The user can check the change of this parameter when the rotary
axis display function is enabled. The user can modify the changed