Adtech ADT-DK300A, Руководство производителя

Страница: 111 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
102
098
Program reset reference point enable
Range : ON~OFF
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : Set whether return to set parameter reference point after mechanical
home, OFF is not to return to reference point, ON is to return to the
reference point after home operation. The reference point is set in
coordinate system interface.
099
Mechanical reset reference point enable
Range : ON~OFF
Unit : None
Authority : Operation admin or higher
Default : OFF
Effective time : Instant
Note : Set whether return to set parameter reference point after mechanical
home, OFF is not to return to reference point, ON is to return to the
reference point after home operation. The reference point is set in
coordinate system interface. The reference point is different from the
point of program home. Reference points 1~4 are for mechanical home.
100
Clear coordinate system in reset mode
Range : MAC Coord & G54 Coord
Unit : None
Authority : Operation admin or higher
Default : MAC Coord
Effective time : Instant
Note : In system operation screen, press X, Y, Z, A in reset mode and then press
the Cancel key to clear the coordinates. MAC is to clear machine
coordinates, G54 is to clear program zero point, which is equivalent to
the operation of tool setting. If it is set to G54, the program home
operation is to return to the zero position of the workpiece.
101
Z safe height (G54 coordinates)
Range : ‐ 9999~9999
Unit : mm
Authority : Operation admin or higher
Default : 0
Effective time : Instant
Note : Set the safe position of Z ‐ axis of the machine tool, which can be machine
tool coordinates or program coordinates, and specified by 096#
parameter.
102
A safe height (G54 coordinates)