Adtech ADT-DK300A, Руководство производителя

Страница: 141 / 172

BZ001M056A ADT ‐ DK300A/400A Engraving Machine
132
Note : Specified system safety signal detection port, the system default is null.
If safety signal detection port is set, the system will generate security
alarm if signal is detected in running state. To cancel this function, enter
"8888" and change to "======". The port can be used for other
functions. Please note that a universal port between 0 and 23 is input.
For example, to specify pin 10, enter 9 and the parameter becomes “IN
(9)”.
064
PressureDect Port
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Configure air pressure signal detection port. If the signal is detected
after port is configured, air pressure alarm is generated. The default
configuration is No.
065
ChuckDectect Port
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Configure system chuck alarm detection port. The chuck signal is
detected in running state, which is same as safety signal.
066
SysOilOut Port
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Configure the system pump output port. The system default is null. This
parameter specifies the oil pump port controlled by general parameter
069~072.
067
TChecking signal Port
Range : 0~23
Unit : None
Authority : Operation admin or higher
Default : =========
Effective time : Instant
Note : Configure tool checking signal detection port. The default is null. This
parameter can be configured in the machine using tool setter.
068
AlarmLight Out Port