— 50 —
Scheduling Menu Prompts
To program schedules, enter Scheduling program mode by pressing [User Code] + # + 80 to display the first choice of the
menu driven programming functions. Only users with an Installer or Master level user code may enter the #80 mode.
Press 0 (NO) or 1 (YES) in response to the displayed menu selection. Pressing 0 will display the next choice in sequence.
Menu selections are as follows:
Time Window ?
1 Yes 0 = No 0
For defining up to 20 time windows each with a start and a stop time programmed by entering
the hours and minutes.
O/C Schedules ?
1 Yes 0 = No 0
For defining the daily open and close schedules for the 2 partitions. Each partition can be
programmed with an opening and closing window for each day of the week and holidays.
Holidays ?
1 Yes 0 = No 0
For defining up to 16 holidays for which partitions they apply.
Timed Events ?
1 Yes 0 = No 0
For defining up to 20 time driven events with the following parameters:
•
Time window
•
Action desired
•
Action specifier
•
Activation time
•
Days of the week
Access Sched. ?
1 Yes 0 = No 0
For defining the limitation of access schedules for the user codes. Each schedule can be
programmed with two window for each day of the week and holidays
#80 & #81 MENU MODE KEY COMMANDS
The following is a list of commands used while in the menu mode.
#80 or #81
Enters Menu mode
[
✳
]
Serves as ENTER key. Press to have keypad accept entry.
[#]
Backs up to previous screen.
0
Press to answer NO
1
Press to answer YES
01-09
All data entries are either 2-digit entries.
00
Exits menu mode, back normal operation mode, when entered at the first question for each category.
www.PDF-Zoo.com
