–
2
–
Table Of Contents
Recommended Programming Procedure ................................................................................................................... 3
Program Field Categories........................................................................................................................................... 4
VISTA 32FB Programming Form................................................................................................................................ 5
Partition-Specific Fields ............................................................................................................................................ 10
Programming With #93 Menu Mode ......................................................................................................................... 12
5800 Series Transmitters Loop Designations........................................................................................................... 16
Alpha Descriptor Vocabulary .................................................................................................................................... 27
Relay Voice Descriptors and Custom Word Substitutes Vocabulary ....................................................................... 35
System Layout Worksheets...................................................................................................................................... 36
Output Devices Programming .................................................................................................................................. 43
Scheduling Menu Prompts ....................................................................................................................................... 50
Scheduling Worksheets............................................................................................................................................ 51
The purpose of this document is to provide a quick and easy way to program your entire system. A recommended
programming procedure is included, followed by a list of program fields with the corresponding program group they
belong to (system-wide, partition-specific, scheduling, etc.). Two program forms are included, one contains all the
programming fields, and the other contains the partition-specific fields. If you are setting up a single-partition
system, the partition-specific fields become system-wide fields.
Following the program forms are system layout worksheets. We recommend that you use these sheets to plan
your system before programming is performed. If you need further information about specific programming
options, see the
VISTA-32FB Installation and Setup Guide
.
•
Make sure that one 2-line alpha keypad is connected to the control and is set to device address "00."
Single Partition System
•
The system default is for a single partition system. Use the VISTA-32FB SINGLE PARTITION
PROGRAMMING FORM when programming for single partition usage. Follow the steps outlined in
RECOMMENDED PROGRAMMING PROCEDURE of this document for proper programming procedure.
Multiple-Partition System
•
You must enter the number of partitions you are using in data field 2*00 to set the system for multiple
partitions. Use the VISTA-32FB SINGLE PARTITION and the PARTITION-SPECIFIC PROGRAM FORMS
when programming the system for multiple partitions. Follow the steps outlined in RECOMMENDED
PROGRAMMING PROCEDURE of this document for proper programming procedure.
SUMMARY OF PROGRAMMING COMMANDS
•
To enter program mode, enter installer code + [8] + [0] + [0]
•
To set standard defaults, press *97
•
To change to next page of program fields, press *94
•
To return to previous set of fields, press *99
•
To erase account & phone number field entries, press [*] + field [*]
•
To assign zone descriptors, press #93 + follow menu prompts
•
To add custom words, press #93 + follow menu prompts
•
To enter Installer's Message, press #93 + follow menu prompts
•
To exit program mode, press *99 OR *98: *99 allows re-access to programming mode by installer code. *98
prevents re-access to programming mode by installer code.
Standard default (*97) values are shown in brackets [ ], otherwise default = 0.
www.PDF-Zoo.com
