–
26
–
Custom Words
Up to 60 installer-defined words can be added to the built-in vocabulary. Each of the 60 words can actually consist of several
words, but bear in mind that a maximum of 10 characters can be used for each word string.
1.
Select CUSTOM WORD Mode. The keys perform the following functions:
[3] Advances through alphabet in ascending order.
[1] Advances through alphabet in descending order.
[6] Selects desired letter; moves the cursor one space to the right.
[4] Moves the cursor one space to the left.
[7] Inserts a space at the cursor location, erasing any character at that location.
[8] Saves the new word in the system's memory.
[
✱
] Returns to Description Entry Mode.
2.
Enter the custom word number (01-60) to be created.
For example, when creating the first word (or word string), enter 01; when creating the second word, enter 02, and so on.
A cursor will now appear at the beginning of the second line.
3.
Type the word using one of the following methods:
a) Press [#] + [the 2-digit entry for the first letter to be displayed] (e.g., [65] for A).
When the desired character appears, press 6 to select it. The cursor will then move to the right, in position for the next
character. Press [#] + [the 2-digit entry for the next letter of the word].
or
b)
Press 3 to advance through the list of symbols, numbers, and letters.
Press 1 to move back through the list.
When the desired character has been reached, press 6 to select it. The cursor will then move to the right, in position for
the next character.
4.
Repeat step 3 to create the desired custom word (or words).
Press 4 to move the cursor to the left, if necessary.
Press 7 to enter a blank (or to erase an existing character).
Each word or word string cannot exceed 10 characters.
5.
Save the word by pressing 8.
The CUSTOM WORD? Prompt will be redisplayed. The custom word (or string of words) will be automatically added to
the built-in vocabulary at the end of the group of words beginning with the same letter.
Custom words are retrieved as word numbers 255 to 314 for words 1 to 60, respectively, when using method 3a to enter
alpha descriptors.
When using method 3b to enter alpha descriptors, each word will be found at the end of the group of words that begin
with the same letter as it does.
6.
Repeat steps 2 through 6 to create up to 60 custom words (or word strings).
7.
Exit Custom Word Mode by entering 00 at the CUSTOM WORD prompt.
Partition Descriptors
1.
Select Part. DESCRIPT. Mode. The system will ask for the partition number desired. Enter the number as a single-key
entry 1-2.
2.
Follow the same procedure as for custom words, except that partition descriptors are limited to 4 characters (e.g., WHSE
for warehouse).
www.PDF-Zoo.com
