–
22
–
Restore/Supervisory Codes
RESTR, SUPV. CODE
1 = YES 0 = NO 0
Press 1 (YES) to enter Restore and Supervisory Codes for zones.
ENTER ZN FOR GRP
000 = QUIT 001
Enter one zone for each group of 16 zones (001-016, 017-032).
ALARM RESTORE
GRP 001-016
00
Enter the first digit of the Alarm Restore Report Code for this group of zones (double-digit entry).
The second digit (for two-digit reporting formats) is automatically the ID (second) digit of the
Alarm Report Code for each zone (if programmed).
Press [
✱
] to continue.
TROUBLE
GRP 001-016
00
Enter the first digit of the Trouble Report Code for this group of zones (double-digit entry). The
second digit (for two-digit reporting formats) is automatically the ID (second) digit of the Alarm
Report Code for each zone (if programmed).
Press [
✱
] to continue.
TROUBLE RESTORE
GRP 001-016
00
Enter the first digit of the Trouble Restore Code (single-digit entry) and press [
✱
]. The second
digit (for two-digit reporting formats) is automatically the ID (second) digit of the Alarm Report
Code for each zone (if programmed).
Press [
✱
] to continue.
BYPASS
GRP 001-016
00
Enter the first digit of the Bypass Report Code (double-digit entry) and press [
✱
]. The second
digit (for two-digit reporting formats) is automatically the ID (second) digit of the Alarm Report
Code for each zone (if programmed)..
Press [
✱
] to continue.
BYPASS RESTORE
GRP 001-016
00
Enter the first digit of the Bypass Restore Report Code (double-digit entry) and press [
✱
]. The
second digit (for two-digit reporting formats) is automatically the ID (second) digit of the Alarm
Report Code for each zone (if programmed).
Press [
✱
] to continue.
ENTER ZN FOR GRP
000 = QUIT 017
Enter one zone for each group of 16 zones. When finished entering Restore and Supervisory
Codes for all zone groups, enter 000.
Press [
✱
] to continue.
QUIT REPORT MENU
1 = YES 0 = NO 0
When all of the report codes have been entered, press 1 (YES) to quit
Report Code
Programming. To enter other system report codes, enter 0 (NO).
Press [
✱
] to continue.
System Group #1 Codes
SYSTEM GROUP #1?
1 = YES 0 = NO 0
To enter System Group #1 codes, press 1 (YES).
CLOSE
1st 00 2nd 00
Enter the first digit of the Closing (Arm-AWAY) report. Press [
✱
]. Enter the second digit of the
report. If the user number is desired as the second digit, enter 01 (not necessary for Contact ID
or High-Speed formats).
Press [
✱
] to continue.
Enter the rest of the codes in the same manner. Other report codes in System Group #1 are:
•
Opening (Disarm). Enable this if you desire Callback Requested reports (the panel answers a phone call from the
downloader).
•
System Low Battery.
•
Low Battery Restore.
•
AC Loss.
•
AC Restore.
•
Periodic Test.
•
Power.
•
Cancel.
•
Program Tamper.
Once the report codes have been entered, the system will prompt:
QUIT REPORT MENU
1 = YES 0 = NO 0
If all of the report codes have been entered, press 1 (YES) to quit
Report Code Programming. To
enter other system report codes, enter 0 (NO).
Press [
✱
] to continue.
www.PDF-Zoo.com
