ADEMCO VISTA-32FB, Руководство по программированию

Страница: 23 / 56

–
23
–
System Group #2 Codes
SYSTEM GROUP #2 ?
1 = YES 0 = NO 0
To enter System Group #2 codes, press 1 (YES).
STAY
1st 00 2nd 00
Enter the first digit of the Arm-STAY report. Press [
✱
]. Enter the second digit of the report. If
the user number is desired as the second digit, enter 01 (not necessary for Contact ID or High-
Speed formats).
Press [
✱
] to continue.
Enter the rest of the codes in the same manner. Other codes in System Group #2 are:
•
Time Set, Log Reset.
•
Log 50%, 90% Full.
•
Event Log Overflow.
•
Exit Error by Zone.
•
Exit Error by User.
•
Recent Close.
Once the report codes have been entered, the system will prompt:
QUIT REPORT MENU
1 = YES 0 = NO 0
If all of the report codes have been entered, press 1 (YES) to quit
Report Code Programming. To
enter other system report codes, enter 0 (NO).
Press [
✱
] to continue.
System Group #3 Codes
SYSTEM GROUP #3 ?
1 = YES 0 = NO 0
To enter System Group #3 codes, press 1 (YES).
EARLY OPEN
1st 00 2nd 00
Enter the first digit of the Early Opening Report Code. Press [
✱
]. Enter the second digit of the
report code. If the user number is desired as the second digit, enter 01 (not necessary for
Contact ID or High-Speed formats).
Press [
✱
] to continue.
Enter the rest of the codes in the same manner. Other codes in System Group #3 are:
•
Early Close.
•
Late Open.
•
Late Close.
•
Failed to Open.
•
Failed to Close.
•
Auto-Arm Failed.
•
Schedule Change.
Once the report codes have been entered, the system will prompt:
QUIT REPORT MENU
1 = YES 0 = NO 0
If all of the report codes have been entered, press 1 (YES) to quit
Report Code Programming. To
enter other system report codes, enter 0 (NO)
Press [
✱
] to continue.
System Group #4 Codes
SYSTEM GROUP #4 ?
1 = YES 0 = NO 0
To enter System Group #4 codes, press 1 (YES).
WALK TEST START
1st 00 2nd 00
Enter the first digit of the Fire Test Start Report Code. Press [
✱
]. Enter the second digit of the
report code.
Press [
✱
] to continue.
Enter the rest of the codes in the same manner. Other codes in System Group #4 are:
•
Walk-Test End.
•
Off-Normal.
Once the report codes have been entered, the system will prompt:
QUIT REPORT MENU
1 = YES 0 = NO 0
If all of the report codes have been entered, press 1 (YES) to quit
Report Code Programming.
QUIT MENU MODE?
1 = YES 0 = NO 0
Enter 1 to exit back to normal Programming mode. Enter 0 to stay in Menu Mode.
www.PDF-Zoo.com