6247G/6247C DC Voltage Current Source/Monitor Operation Manual
4.2.6 MENU Key (Parameter Setting)
4-9
Disp Digit
Selects the number of measurement display digits.
Spaces are displayed as blank digits but do not affect any mea-
surement data.
5 digits: Displays measurement data with 5½ digits.
4 digits: Displays measurement data with 4½ digits.
3 digits: Displays measurement data with 3½ digits.
Disp Unit
Selects the output format style for measurement data and compa-
rable upper and lower limit values.
Prefix:
Displays measurement data by using a decimal point
and a unit symbol.
Exponent:
Displays measurement data in an exponential form.
Mfunc Link
Links the source function to the measurement function.
On:
The source function is linked to the measurement
function. (VSIM/ISMV)
Off:
The measurement function is unaffected by the source
function.
MEMORY
Sets the measurement data memory-related parameters.
• While the ST indicator is ON, measurement data is always
being stored in the memory.
• When the memory reaches the upper limit: 8000 data sets, the
ST indicator blinks and further data cannot be stored.
• When the trigger mode is set to AUTO in the DC or pulse
sweep mode, the following parameters cannot be set.
Store Mode
Selects the measurement data memory functions.
The content of the measurement data memory is cleared when the
Store Mode is changed.
Normal: Stores data in the measurement data memory in the
normal mode.
Burst:
Stores data in the measurement data memory in the
burst mode. Used for high-speed measurement.
Off:
Turns OFF the measurement data memory storage
operation.
Mem Recall
Reads out the data stored in the measurement data memory.
The measurement data is displayed on the upper line correspond-
ing to the recall number on the lower line.
The recall number can be set in the range of 0 to 7999. If no mea-
surement data is stored, "No Data" is displayed.
Mem Clear
Clears the measurement data memory.
