ADAM CPU 821x
Chapter 3 Deployment of the CPU 821x
ADAM 8000 Manual CPU 821x – Rev 1.1
3-7
System 82xx modules may be supplied with up to 16Byte of configuration
data from the CPU. The use of the Siemens STEP
7 manager provide the
option to supply parameters to the configurable System 82xx modules at
any time.
For this purpose you have to double-click the respective module in the
plug-in diagram.
The following figure shows the configuration of the positioning module
IM 8254:
Data is transferred between the CPU and the PC via MPI. If your PU has no
MPI functionality you may use the ADAM "Green Cable" to send the data
serial by a peer-to-peer connection. The ADAM "Green Cable" has the
OrderNo. ADAM-8950-0KB00 and may only be used with ADAM
components System 8xxx.)
Please regard the notes about the "Green Cable" in chapter 1!
•
Connect your PU to the CPU
•
Transfer the project into the CPU by means of
PLC
>
Load into module
in your project configuration tool.
•
Install an MMC and transfer the application program to the MMC by
clicking on
PLC
>
Copy RAM to ROM
.
•
During the write operation the MC-LED of the CPU blinks. For internal
reasons the message signalizing completion of the write operation
arrives too soon. The write operation is only complete when the LED has
been extinguished.
Configuration of
modules
Transferring the
project
