CPU ADAM 821x
Chapter 6 Deployment of the CPU 821xDP
ADAM 8000 Manual CPU 821x – Rev 1.1
6-9
•
Create a new System 300 project.
•
Add a profile rail from the hardware catalog.
•
Add the CPU 315-2DP (
6ES7 315-3AF01-0AB0
).
•
You find the CPU with Profibus master in the hardware catalog under:
Simatic > CPU-300 > CPU 315-2DP >
6ES7 315-3AF01-0AB0
.
•
Assign the Profibus address 2 to your master.
•
Click at DP and select the operating mode "DP master" under
Object
properties
. Confirm your entry with OK.
•
By clicking on "DP" with the right mouse button, the context menu
opens. Choose "Add master system". Create a new Profibus subnet via
NEW. The following picture shows the created master system:
To be compatible with the STEP®7 projecting tool from Siemens you have
to include the CPU 821xDP explicitly like mentioned above.
•
Add the System "ADAM_CPU821x" to your subnet. The module is to find
under
PROFIBUS-DP > Additional Field devices > I/O > DP8000
. Assign
the Profibus address 1 to the DP slave.
•
Place the CPU 821x-2BP01 from Advantech at the plug-in location 0 of
the hardware configurator.
Plug-in location 0 is mandatory!
•
You may fix the data areas of the Profibus section in the CPU parameter
window. More details are under "Include Profibus section".
•
Include your System 82xx modules in the assembled order starting with
plug-in location 1.
•
If there is a DP master at the backplane bus, you have to include this at
the concerning plug-in location, too. Here the configuration takes place
via WinNCS from Advantech.
•
Save your project.
•
Transfer your project via MPI to the CPU 821xDP.
Please regard the hints in chapter 1!
Create a virtual
Profibus system
Project
CPU 821xDP and
modules
