ADAM CPU 821x
Chapter 3 Deployment of the CPU 821x
ADAM 8000 Manual CPU 821x – Rev 1.1
3-9
You may reach the parameterization window for the Profibus section of the
CPU 821x by double-clicking on the added System 821x-CPU under
ADAM_DP8000.
Via the different registers you may access all Profibus parameters of the
CPU 821x.
More information is to find in the chapter "Deployment of the CPU 821xDP".
The CPU 821x doesn't use all the parameters that may be defined in the
Siemens STEP
®
7 manager.
The following parameters are currently employed by the CPU:
General:
MPI address of the CPU
maximum MPI address
Initialization:
Start-up, if the planned hardware
does not match the actual
hardware configuration
Remanence:
Number of bytes of bit memory
starting at MB0
Number of S7-timer from T0
No. of S7-counters from Z0
Time alarm :
OB10:
active
execution
start date
time-of-day
Prompter :
OB35:
execution
Cycle / timing flags:
Cycle watching time
Load placed on cycle time due to
communications
Timing flags with flag byte no.
Parameterization
of the Profibus
section of CPU
821xDP
Supported
parameters
