CPU ADAM 821x
Chapter 5 Deployment of the CPU 821xDPM
ADAM 8000 Manual CPU 821x – Rev 1.1
5-7
To be, like mentioned above, compatible to the STEP
7 projecting tool from
Siemens, you have to include the CPU section explicitly.
•
Add the System "DP8000" to the Profibus subnet. You find this in the
hardware catalog under
PROFIBUS DP
>
Additional field devices
>
IO
>
DP8000
.
•
Assign the Profibus address 1 to this slave.
•
Place the CPU 821x-2BM01 from Advantech at the plug-in location 0 in
your configurator.
The plug-in location 0 is mandatory!
Now the project engineering of your Profibus-DP master and your CPU is
finished. The following shows how to include the directly plugged-in System
8xxx modules.
To include the modules plugged-in at the bus, you drag the according System
8xxx modules from the hardware catalog under
ADAM821x
and drop it on the
locations below the CPU. Start with plug-in location 1.
Configure
CPU section
Configure
central periphery
