Chapter 4 Deployment of the CPU 821xNET
CPU ADAM 821x
4-36
ADAM 8000 Manual CPU 821x – Rev 1.1
1
3
4
5
6
2
Here you may configure an active read connection.
In addition to the data required to establish the connection, you also have
to specify the source from where the data should be read.
Input fields
Remote Host
IP address of the station from which you wish to read
data.
Remote Port
Port address of the remote station.
Local Port
Port address of your own (local) station. To simplify
matters you can specify the same port address for remote
and local.
Time (10mSec)
Definable interval for cyclic read operations.
OrgKennung
Type of the source block.
DBNr
Number of the source block.
AnfAdr
Start address of the source block.
Len
Word length of the source block.
Tick-box
UDP
This tick mark selects unsecured communications. No
virtual connections are used by unsecured communication
links. In this manner you may only display UDP
messages.
Buttons
Connect
The connection is established and prepared for the read
operation.
Read this
The data requested is read via this connection.
ReadA tab
[1] port
data
[2]
establish a connection
[3] hexadecimal
number
[4]
information window for the
status of the connection
[5] source
data
[6]
ASCII formatted display of
the data received
