Chapter 3 Deployment of the CPU 821x
CPU ADAM 821x
3-6
ADAM 8000 Manual CPU 821x – Rev 1.1
Configuration of directly installed System 82xx modules
The System 82xx modules located adjacent to the CPU on the V bus have
to be configured as a virtual Profibus master system by means of the
Siemens hardware configurator as described below:
•
Create a new project.
•
Insert the CPU 315-2DP (6ES7 315-2AF01-0AB0). You have to create a
new Profibus subnet.
•
Attach the System "ADAM_DP8000" to the subnet. The respective
entries are located in the hardware catalog under
PROFIBUS DP
>
Additional Field Devices
>
IO
>
ADAM821x.
Assign Profibus address 1
to this slave.
•
Place the ADAM CPU 821x that you want to deploy at plug-in location 0
of the configurator.
Plug-in location 0 is mandatory!
•
Include your System 82xx modules in the location sequence starting
from plug-in location 1.
•
Save your project.
Configuration as a
virtual Profibus
master system
