Chapter 6 Deployment of the CPU 821xDP
CPU ADAM 821x
6-8
ADAM 8000 Manual CPU 821x – Rev 1.1
The following picture illustrates the project engineering at the master and
the slave:
Slave System
PB-
Addr.:1
Slot Module
0 CPU 821xDP
1
. Expansion
. modules
.
3
PB-
Addr.:3
DP200V
CPU21x
Slot Module
0 Output (Bytes)
1 Input (Bytes)
Master system
PB-
Addr.:2
The CPU 821xDP is configured in the STEP
7 Manager from Siemens.
Following requirements have to be fulfilled before configuration:
•
STEP
7 Manager from Siemens is installed.
•
GSD-file has been integrated in the hardware configurator of Siemens.
•
There is a possibility for data transfer between PU and CPU.
The hardware configurator is part of the STEP
®
7 projecting tool from
Siemens for project engineering. The modules parameterizable via this tool
are in the hardware catalog of this tool.
For the deployment of the Profibus-DP slaves of the Systems ADAM 8xxx
from Advantech you have to include the modules via an GSD-file from
Advantech in the hardware catalog.
Start the hardware configurator from Siemens. For including a new GSD-
file, no project may be opened.
Open the GSD-file window under
Options
>
Install new GSD-file
. Insert the
delivered data device and select the wanted GSD-file. Via <Open> you
install the GSD-file.
Normally you'll find the ADAM modules included via GSD-file in the
hardware catalog under
Profibus-DP > Additional Field devices > I/O >
ADAM
.
Reference
between master
and slave
Project
engineering of
the CPU 821xDP
Preconditions
Install hardware
configurator from
Siemens
Include GSD-file
