ACS ACS-24UHF/Eagle, Руководство пользователя

Страница: 54 / 239

54

If you want the shapes in a full circle, double the Rotate By setting. In this case, you would enter 36 deg (2
x 18). If you then want to overlap the circles, decrease the Offset Y to located them closer to the center:

The Offset X value will move each shape that distance in the X direction. Note how an increasing value of X
affects the arrow shape in this duplication:

The designing possibilities are unlimited with this magnificent feature! Be sure to watch the video linked at
the beginning of this section.
3.11 Undo/Redo
Undo

As with most Windows applications, there is an Undo function to reverse the most recent steps performed.
You can use any of the following to execute the Undo function:

Click on the Undo icon on the File Toolbar

Press Ctrl-Z

Go to Edit>Undo.

If you are experiencing software crashes due to memory limitations, two solutions are available:
Click on Accept
when done.
Enter 9
Change
to 36
Decrease
to 20
Click here
Offset X: 0 Offset X: 15 Offset X: 30