ACS ACS-24UHF/Eagle, Руководство пользователя

Страница: 113 / 239

113

When you click on Import , you will be asked if you wish to Continue Tracing or Finish Tracing. Select
Finish Tracing . Click on Finish Tracing.

Next, let’s have a look at the
Layers Bar. Opening the trace layer shows that each of the 9 colors not only
has those shapes joined together, but also have been named with the corresponding color:

If the Blackout Outlines option had not be marked, then the black layer would not be filled in:

You’ll notice there’s also a white layer which will always be created unless the background of the image is a
color other than white. This white layer can be deleted except in situations where there are white shapes
that make up the image. For example, here’s an image that’s been traced and it contains white:
Even though Count was set to 15,
only 7 layers/colors were traced.
Note the layers are named based
on the color.
Blackout Outlines not checked Blackout Outlines checked