ACS ACS-24UHF/Eagle, Руководство пользователя

Страница: 17 / 239

17

Go to File>Import>From Basic Shapes and select the category called Arrows . Double click on any of the
arrow images to add that image to your screen. An arrow will help you better compare where a shape gets
drawn versus how you see it on the screen.

After double clicking the arrow, you should see it on the screen. In this test, it doesn’t matter where you
place the arrow as it will be drawn at the origin you set on the machine. If you like, you can drag the arrow
shape to the
Virtual Mat
on the screen, if it’s not already on the mat:

To open the cutting control window, go to Cut Project With>Klic-N-Kut Series . A new window will open
where you can locate your COM port assignment under the Serial Port menu:
Double click any of the
arrow images to add to
your screen.
Select
24” x 12” Large
Mat to most closely
match the mat you
received with your KNK.
Select Portrait for
this test. Later on,
experiment with
Landscape.
Set Zoom to 30%
Select Light Blue
or other desired
color.
More on moving and
manipulating basic shapes
is covered in
Section 3.09 .
Indicates the direction the mat is fed into the cutter. In
Portrai t mode, arrow will point up on the screen. In
Landscape mode, arrow will point to the left on the screen.
More on the Virtual Mat is covered in Section 4.04