ACOEM Met One Instruments GAS-1060, Руководство пользователя

Страница: 42 / 164

Serinus 60 User Manual 3.0
Page 42
Communications Menu Refer to Section 3.4.21.
3.4.3 Analyser State Menu
Main Menu

Analyser State Menu
This displays the status of various parameters that affect instrument measurements.
Status Menu
Refer to Section 3.4.4.
Temperature Menu
Refer to Section 3.4.5.
Pressure & Flow Menu Refer to Section 3.4.6.
Voltage Menu Refer to Section 3.4.7.
Model This field will always display Serinus.
Variant The variant of the Serinus model (e.g. S60).
Range The range of the Serinus model (Standard, High or Trace).
Ecotech ID The Ecotech ID number.
Serial No. The main controller PCA serial number.
Board Revision The main controller PCA version.
Firmware Ver. This field displays the firmware version currently in use on this
instrument. This can be important when performing diagnostics
and reporting back to the manufacturer.
Power Failure This field displays the time and date of the last power failure or
when power was disconnected from the instrument.
3.4.4 Status Menu
Main Menu

Analyser State Menu

Status Menu
The Status Menu presents a list of the current Pass/Fail statuses of the main components.
During warm-up, the status of some parameters will be a dashed line.
Event Log This field enters a screen with a log of all the events that the
instrument has performed. These events include errors and
warnings. This log is stored on the USB memory stick.
The log is organised by month. When you enter this screen you will
be prompted to enter the month for which you wish to view
events.
Show Error List This field allows the user to display the list of current errors and
warnings on the screen.
Next Service Due This field is visible with the next service due date if the service is
due within the next two weeks.
+5V Supply Pass if the +5 V power supply is within the acceptable range.
+12V Supply Pass if the +12 V power supply is within the acceptable range.