ACOEM Met One Instruments GAS-1060, Руководство пользователя

Страница: 59 / 164

Operation Page 59
Bluetooth This field indicates whether the instrument is remotely
connected to an Android device.
Reset After changing the ID or PIN, it is necessary to reboot the
Bluetooth module. This is done by resetting the instrument or
by using this menu item to reboot only the Bluetooth.
ID This is the Bluetooth ID of the instrument. Use the keypad to
edit this field (refer to Section 3.3.1 for instructions on
entering text with the numeric keypad). The default ID setting
is
Serinus ( Ecotech ID ). The word Serinus is always the first
part of the name and cannot be edited. The second part is the
Ecotech ID .
PIN This is a passcode/pin required for the Serinus Remote
Application to connect to the instrument. The default pin is
1234.
3.4.30 Advanced Menu
This menu is accessed via a different method than the other menus. From the Home Screen press
the following keys: (
. ̅
)99(
+
SPACE
)
This menu contains technical settings, diagnostics and factory hardware installations. No items in this
menu should be accessed without authorisation and supervision of qualified service personnel.
Language Select a language.
Hardware Menu Refer to Section 3.4.31.
Service Displays When set to On , new items appear on many different menus.
These fields are for diagnostic and service personnel only.
Default is
Off .
Next Service Due Enables the user to edit the next service due date.
Jump to Next State Moves the sequence to the next state (e.g. from Fill to
Measure). This command is most commonly used to force an
instrument out of the warm-up sequence early.
Parameter Display Menu Refer to Section 3.4.32.
Reset to Factory Defaults Reset the configuration to factory defaults. This will erase all
calibrations and user configuration information.
Rebuild Index If a data log becomes corrupted it may be possible to restore
It by rebuilding its index file. This command will ask you to
specify a month and will rebuild the index for that month. This
operation can take many minutes and it should not be
interrupted. While the file is rebuilding any data logging will
be suspended.
3.4.31 Hardware Menu
Advanced Menu

Hardware Menu
This menu contains factory hardware installations. If you reset to factory defaults you may need to
revisit this menu to enable your installed optional features.