ACOEM Met One Instruments GAS-1060, Руководство пользователя

Страница: 40 / 164

Serinus 60 User Manual 3.0
Page 40
Readings (1)
Displays the concentration being measured in real-time. The display can be configured to show just
the instantaneous data or the instantaneous and average data (refer to Section 3.3.2
Home Screen ).
Error/Status Line (2)
The error/status line provides users with information on any problems the instrument may have. It
displays the highest priority error or status condition contained in the
Status Menu (refer to Section
3.4.4).
Instrument Activity (3)
This line shows what function the instrument is currently performing. Generally, it will show three
groups of actions: Warm-up, Measurement or Calibration.
Selection Buttons (4)
These buttons are used on the home screen to enter one of two menus. The Quick Menu (refer to
Section 3.4.1) contains all information and features necessary for scheduled maintenance. The Main
Menu (refer to Section 3.4.2) contains all information and fields available to users and is generally
only used during initial set-up and diagnostics.
Time and Date (5)
The time and date are displayed in between the menu buttons at the bottom of the screen.
Concentration Units (6)
The instrument units are displayed in the bottom right hand corner of the display.
USB Detection (7)
A USB symbol will be displayed in the bottom right corner when the USB memory stick is plugged in
(the USB socket is behind the front panel). If the USB symbol is not shown, the USB memory stick
should be inserted. Underneath the USB symbol arrows may be displayed which indicates data
transfer. The USB memory stick must not be removed whilst the arrows are visible.
Note: To safely remove the USB memory stick, navigate to the Quick Menu and use the Safely
Remove USB Stick function (refer to Section 3.4.1).
3.4 Menus & Screens
The menu system is divided into two sections, the Quick Menu and the Main Menu selectable from
the Home Screen . The Quick Menu contains all information and operations necessary during
scheduled maintenance visits. The Main Menu contains all fields that are accessible to users. It
provides information on component failures and measurement parameters as well as editable fields
and test procedures.
In general, editable parameters are displayed in bold font. Non-editable information is displayed in a
thin font. Some parameters may become editable based on the state of the instrument.