ACOEM Met One Instruments GAS-1060, Руководство пользователя

Страница: 53 / 164

Operation Page 53
3.4.21 Communications Menu
Main Menu

Communications Menu
Configures how the instrument communicates with external instrumentation and data loggers.
Data Logging Menu Refer to Section 3.4.22.
Serial Communication Menu Refer to Section 3.4.23.
Analog Input Menu Refer to Section 3.4.24.
Analog Output Menu Refer to Section 3.4.25.
Digital Input Menu Refer to Section 3.4.26.
Digital Output Menu Refer to Section 3.4.27.
Network Menu Refer to Section 3.4.28.
Bluetooth Menu Refer to Section 3.4.29.
3.4.22 Data Logging Menu
Main Menu

Communications Menu

Data Logging Menu
When editing the numeric or text menus, the “-” key will delete the current parameter and move the
others up to take its place; the “+” key will insert a parameter at the current location and move the
ones below it down. The internal logger can log a maximum of 12 parameters.
Data Log Interval Displays the interval at which the data is saved to the USB memory
stick. Selecting a
1 sec interval may result in occasional
measurements not being logged or slow response to serial
commands.
Data Log Setup – Numeric Numeric list of the parameters logged. This is a quicker way to
enter parameters (for lists of parameters refer to Table 19).
Data Log Setup – Text Select the list of logged parameters by name.
3.4.23 Serial Communication Menu
Main Menu

Communications Menu

Serial Communication Menu
Serial ID This is the ID of the instrument when using multidrop RS232
communications. This ID can be changed to support multiple
instruments on the same RS232 cable.
Bayern-Hessen ID
[Bayern-Hessen Protocol]
This is the Bayern-Hessen ID used by the Bayern-Hessen
Protocol.
NO2 ID
[Bayern-Hessen Protocol]
This is the ID of the NO
2
gas used by the Bayern-Hessen
Protocol.
Service port (RS232 #1)
Multidrop port (RS232 #2)
The port parameters below are repeated for each serial port.