Abicor Binzel iROB 501 PRO, Оригинальная инструкция по эксплуатации

Страница: 91 / 128

iROB
®
501 PRO 9 Maintenance and cleaning
EN - 91
9.6 Maintenance work on the Wire Buffer KINETIC
9.6.1 Replacing the wire guide
1
Loosen the hexagon socket screws
(B)
.
2
Remove the power fitting (C) from the Wire Buffer KINETIC.
3
Replace the wire guide
(A)
.
4
Reattach the power fitting (C) with a tightening torque of 6.2 Nm.
9.6.2 Replacing the wire guide and guide rollers in the Wire Buffer KINETIC
1
Loosen the knurled screws (6×)
(B)
and remove the cover
(A)
.
2
Loosen the hexagon socket screws (2×) (C) and remove the upper part of the wire guide clamp (D) .
3
Loosen the hexagon socket screws with screw locking rings (4×)
(F)
and remove the guide roller
covers (2×)
(E)
.
Fig. 49 Replacing the wire guide
A
Wire guide
B 2× hexagon socket screws (M5 × 25)
C
Power fitting
A C B
Fig. 50
Removing the covers
A Cover
B 6× knurled screw
C 2× hexagon socket screw (M3 × 12)
D Wire guide clamp
E 2× guide roller cover
F 4× hexagon socket screw with screw locking ring
B A
E
F
C D