Abicor Binzel iROB 501 PRO, Оригинальная инструкция по эксплуатации

Страница: 78 / 128

EN - 78
7 Operation iROB
®
501 PRO
The values set for the internal functions are inserted under the job number.
It is not possible to store the parameters stored in the welding power source’s memory separately to
the values of the internal functions. The data is always jointly written to the file
"BINZEL_iROB_WELDING_PARAMETER.CSV".
If backup data is to be imported into the welding power source, the data can be read in separately
or together.
— "ALL": welding parameters and values of the internal functions
— "1": welding parameters
— "2": values of the internal functions
R wld_en_ratio Welding EN ratio 1% AR CrilsetStep2 Double-click
adjustment value
1 A
S pls_pki_adj Pulse peak current
Fine adjustment
1 A AS WModeTblNb Welding table no.
1
T pls_pkt_adj Pulse peak time
Fine adjustment 0.1 ms AT chksum Checksum Checksum
value
U pls_bsi_adj Base current
Fine adjustment
1 A AU – – –
V lpls_pki_adj L pulse peak current
Fine adjustment
1 A AV – – –
W lpls_pkt_adj L pulse peak time
Fine adjustment
0.1 ms AW – – –
X lpls_bsi_adj L base current
Fine adjustment
1 A AX – – –
Y wave_feed_adj Wave pulse feed
amplitude
1% AY – – –
Z ctrl Sequence
information
2
AZ – – –
1
Information from the welding parameter table is recorded.
2
The end crater filling sequence and other information are recorded.
Tab. 40
Gap Position Description Unit Gap Position Description Unit
Fig. 40
Set data