ABB STT04, Инструкция по эксплуатации

Страница: 114 / 285

PTH PRESSURE TRANSMITTER
CREATE/MODIFY CONFIGURATION
D - 2
Key Display Comments
Select NEW to create a configuration. To modify an
existing configuration, select MODIFY . The screen
sequence is the same, however, the MODIFY
screens will appear with the values and arrow posi-
tions as they were originally configured.
Select HART .
Select PTH .
Enter a name for the configuration ID tag using up to
eight ASCII characters. To select a character, press
the key that has the desired character. Continue to
press the key until the desired character appears.
Use the right arrow key to move to the next charac-
ter. Use the left arrow key to go back to the previous
character.
Select
ANALOG.
NOTE: The DIGITAL selection should only be made
when using the device in the multidrop. A CHANNEL
# prompt appears when DIGITAL is selected.
Type a descriptive message using up to 32 charac-
ters. This field can be used to note anything of impor-
tance to the device or installation.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
Type a descriptor string using up to 16 characters.
This field can be used for notations about the device
or process.
To select a character, press the key that has the
desired character. Continue to press the key until the
desired character appears. Use the right arrow key to
move to the next character. Use the left arrow key to
go back to the previous character.
C O N F IG
CONFIGURATION
→
NEW
MODIFY
ERASE
E N T E R
DEVICE TYPE
ABB FSK
→
HART
E N T E R
TRANSMITTER TYPE
→
PTH EBTH
TB82 pH TB82 ORP
TB82 pION TB82 CONC
E N T E R
STT04 CONFIGURATION
[
]
←
PREVIOUS NEXT
→
E N T E R
SELECT MODE:
→
ANALOG
DIGITAL
E N T E R
MESSAGE:
←
PREVIOUS NEXT
→
E N T E R
DESCRIPTOR:
←
PREVIOUS NEXT
→