ABB ClimaECO SB/Ux.0.1 Series, Руководство по эксплуатации продукта

Страница: 297 / 391

Description of application and parameters
Application "General functions"
Product manual 2CKA001473B9679 │297
11.9.2.3 Cycle time
Options: Setting option from 00:00:55 to 01:30:00 (hh:mm:ss)
The telegrams of the object during operation are sent cyclic on the bus.
The parameter specifies the time interval from which a new sending of the telegrams occurs.
11.9.2.4 Enable object
Options: Deactivated
Activated
■
Deactivated:
– Object "GFx: enable" is not enabled.
■
Activated:
– Object "GFx: enable" is enabled. The function "Cyclic telegram" can be temporarily
blocked via the object.
The 1-bit communication object "GFx: enable" can be enabled with this parameter.
Note
If the "Enable object" parameter is activated, the following parameters can be
set:
■
"Object value enable object"
■
"
Enable object after return of voltage"
11.9.2.5 Object value enable object
Options: Normal
Inverse
■
Normal:
– If an Off telegram is received via the object "GFx: enable", the function "Cyclic telegram"
is blocked. An On telegram deactivates the blockage.
■
Inverse:
– If an On telegram is received via the object "GFx: enable", the function "Cyclic telegram"
is blocked. An Off telegram deactivates the blockage.
The parameter is used to specify whether function "Cyclic telegram" is blocked temporarily at
the receipt of an On or Off telegram.
Note
This parameter can only be set if the "Enable object" parameter is set on
"activated".