ABB ClimaECO SB/Ux.0.1 Series, Руководство по эксплуатации продукта

Страница: 185 / 391

Description of application and parameters
"Relative humidity" application
Product manual 2CKA001473B9679 │185
11.6.16 Step controller — Switch command below threshold 1
Options: Off
On
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
11.6.17 Step controller — Priority below threshold 1
Options: End priority
OFF with priority
ON with priority
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
11.6.18 Step controller — Percent below threshold 1
Options: 0 … 100 %
The parameter defines which state should be sent after threshold value 1 is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Percent".