Description of application and parameters
Application "RTC"
Product manual 2CKA001473B9679
│125
This parameter is used to specify the amount of time that will elapse before the current setpoint
value is automatically transmitted.
Note
This parameter is only available when the "Send current setpoint" is set on "Only
during change".
11.4.5 Setpoint settings - Basic set value is
Options:
Set-point for cooling comfort
Set-point for heating comfort
Mean value between heating comfort and cooling comfort
■
Setpoint for cooling comfort:
– The device uses the temperature value that has been set via parameter "Setpoint
temperature for cooling comfort" (°C).
■
Set-point for heating comfort:
– The device uses the temperature value that has been set via parameter "Setpoint
temperature for heating comfort" (°C).
■
Mean value between heating comfort and cooling comfort:
– The device uses the mean value of the two specified setpoints.
The RTC requires a defines basic set value for its function. The parameter is used to specify the
set value the device accesses.
Note
The parameter can only be set when the "Setpoint heating comfort = Setpoint
cooling comfort" parameter is set on "No".
Содержание ClimaECO SB/Ux.0.1 Series
Страница 382: ...Notes Product manual 2CKA001473B9679 382 13 Notes ...