Description of application and parameters
"Relative humidity" application
Product manual 2CKA001473B9679
│194
11.6.34 Step controller — Switch command above threshold 3
Options:
Off
On
The parameter defines which state should be sent after threshold value 3 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
Notice
The parameter is available only when parameter "Controller type" is set on
"Two-stage" or "Three-stage".
11.6.35 Step controller — Switching command at measurement failure
Options:
Off
On
If the internal or external measurement malfunctions or fails, a defined switching command can
be sent through this parameter.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Switching command".
11.6.36 Step controller — Priority above threshold 3
Options:
End priority
OFF with priority
ON with priority
The parameter defines which state should be sent after threshold value 3 is exceeded.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Priority".
Notice
The parameter is available only when parameter "Controller type" is set on
"Three-stage".
Содержание ClimaECO SB/Ux.0.1 Series
Страница 382: ...Notes Product manual 2CKA001473B9679 382 13 Notes ...