20 Introduction to the manual
eventualities that may arise during installation, commissioning, operation and
maintenance of the drive.
If the drive is adapted to specific customer needs or applications, and handling,
installation, and operation of the drive are affected by these modifications, information on
these modifications is provided in the appropriate documentation (e.g. outline drawings,
wiring diagrams, technical data, engineering notes).
If information is required beyond the instructions in this manual, refer the matter to ABB.
Target groups and required qualifications
The drive presented in this manual is part of an industrial environment where voltages are
present that contain a potential hazard of electric shock and/or burn. For this reason, only
personnel who have a thorough knowledge of the drive and the industrial environment and
have obtained the required qualification
must handle, install, operate, or maintain the
drive.
The manual addresses personnel who are responsible for unpacking, transportation,
installation, operation and maintenance of the drive. The personnel must carry out the
below listed tasks in a manner that does not cause physical harm or danger, and that
ensures the safe and reliable functioning of the drive.
Note:
Commissioning of the drive must only be performed by qualified and certified ABB
personnel.
Handling
The personnel must be skilled and experienced in unpacking and transporting heavy
equipment.
Mechanical installation
The personnel must be qualified to prepare the installation site according to the site and
equipment requirements and to perform the installation accordingly.
Electrical installation
The personnel must have a sound knowledge of the relevant electrical codes and
specifications covering low and medium voltage equipment, be experienced with electrical
wiring principles, and know the electrical symbols typically used in wiring diagrams.
Operation
The personnel include all persons who operate the drive from the local operating panel of
the drive. The personnel must know the functions of the operating panel, be adequately
trained for the drive, and know the driven process. Special knowledge of frequency
converter technology is not required.
Содержание ACS580MV
