Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.2.2 Microscope Control Panel
•
Clear scanmap
The entire scanmap area will be cleared and reset to default.
•
Use selection box restriction
The preview image shows the area that will be digitized with a red and/or an orange mask. If
the
Use selection box
is enabled, and the crop function is selected, a black frame displayed in
the image, and only the area inside the box is scanned. It is useful if you only want to scan the
area that is equivalent with the size of the coverslip, so external specks will not be scanned.
Figure 57 – Use selection box
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
94(156)
