Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.1.1 Profile Settings Panel
5.1.1 Profile Settings Panel
Objective settings
This field displays the objective used for scanning. Objective type: 20x; 40x
Focus settings for the scan profile
Figure 26 – Focus settings for scan profile
•
Limits of the range
: You can define focus limits by selecting
Limits of the range
for focusing.
You can set the upper and lower limits by selecting the desired value in the selection boxes.
This is useful if focusing was not targeted on the specimen, but on a spot on the coverslip.
•
Focus distance:
the distance of focal points can be set to create a focus map, based on which
the software calculates interpolated focus values (one step in distance means one FOV).
•
Auto focus:
Focus value is set automatically to match sample characteristics.
•
Manual focus:
The manually set focus point coordinates are listed.
Set
and
Go to
options are
available on this panel too, and each point can be deleted by clicking
Remove
. Click
Clear
points
to remove all the manual focus points.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
57(156)
