Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.1.2 Microscope Control Panel
Click the
button to display barcode label area. To rotate the label area by 180°, click
.
Figure 39 – Barcode label area window
– Undo / Redo modification made during specifying the
Scanmap
. These buttons are inactive
when
Use threshold
function is applied.
5.1.2.2 Focus Indicator
Click
to activate the
Focus indicator
function. Search for the sharpest focus on the current field
of view automatically by clicking
-
Auto focus
button.
To define focus limits, select
Limit the range
. Set the upper and lower limits by selecting the desired
value in the selection boxes. By using
Set +-Range
, the
Lower limit
value is set to -32 of the current
focus value and the
Upper limit
value is set to +32 of the current focus value. This is useful if
Auto
Focus
does not find the focus on the specimen, but on the coverslip. Also, this makes the focusing
sequence faster.
For manual focusing define the manual focus step size by adjusting the
Step size
slider and use the
two arrow buttons to focus manually. This is useful when you are interested in an area that remained
blurry with
Auto Focus
(for example, the specimen is thicker in that area). This does not influence the
way slides are digitized in Auto focus mode.
Figure 40 – Focus indicator panel
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
73(156)
