Pannoramic 250 FLASH III 3.0.2 User’s Guide
5.3.3 General functions at the slide menu
5.3.3 General functions at the slide menu
•
Mark empty slide positions – Define range in the
Range to skip
boxes to set multiple slide
positions as empty. For single slides, enter / set slide position with the arrows in the
Range to
skip
box or right-click on a slide and select
Skip
.
•
Click
Reset
at the Slides settings bar to cancel slide selections as empty, or right-click the
thumbnail of a slide selected as skipped and click
Reset
.
Figure 78 – General functions at the slide menu
•
You can apply a selected profile to a defined range of slides at the
Profile range
section. Set
the slide positions within the range (first and last slide) then click
.
•
You can also set
Scan properties range
to a slide with a profile attached. When more profiles
are attached to a slide, always the last scan record will be set with the selected scan property.
Click '
+
' to Open
ScanContext selector
and click
Apply
to validate the scan properties settings
to all selected slides and related profiles.
Figure 79 – ScanContext selector
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
108(156)
