Pannoramic 250 FLASH III 3.0.2 User’s Guide
3.3 Inserting and Removing Slides
3.3 Inserting and Removing Slides
3.3.1 Insert slides into a magazine
Figure 13 – Inserting slides into a magazine
Caution!
Only original 3DHISTECH P250 magazines are allowed for use with
Pannoramic® 250 FLASH III!
The magazines can contain a maximum of 25 slides.
•
Push slide
(1)
into the magazine
(3)
with its barcode end
(2)
first. The symbols on the side of
the magazine demonstrate the proper way of inserting slides.
•
The magazine and its proper insertion is identified by a sensor in the main unit upon
actuating it by the magnet in the side of the magazine
(4)
.
Note:
You should insert several slides into a magazine without empty slots.
Begin the insertion on position 1 of the magazine.
Caution!
To insert or remove a filled magazine from the device, slightly tilt it to
its closed side to prevent the slides from accidentally falling out.
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
33
(
156
)
