Pannoramic 250 FLASH III 3.0.2 User’s Guide
7 Troubleshooting and Maintenance
7.4.2 Replacing fuses of the main power switch
1. Switch off the main power supply and disconnect the power cable (see chapter
).
2. The fuse compartment is located next to the main power supply switch at the back side of
the Pannoramic® 250 FLASH III.
3. Release lock (
1
) by pushing the lever to the left, so the insert (
2
) can be pulled out.
Figure 101 – Location of the fuse compartment
4. Remove insert from the compartment.
Figure 102 – Removing the fuse insert
5. Replace fuses, put the insert back into its mounting, and push it inwards until you hear a
snap, so the lever locks.
Figure 103 – Replacing the fuses
September 16, 2020 – Rev. 1
3DHISTECH Ltd.
143
(
156
)
