3Com TP-1610, Руководство пользователя

Страница: 229 / 496

V6100 and V7122 User Guide
229
ini File Field Name
Web Parameter Name
Valid Range and Description
ISDNGeneralCCBehavior
[General Call Control
Behavior]
16 = The gateway clears down the call if it receives a NOTIFY message
specifying ‘User-Suspended’. A NOTIFY (User-Suspended) message is
used by some networks (e.g., in Italy or Denmark) to indicate that the remote
user has cleared the call, especially in the case of a long distance voice call.
32 = Applies only to ETSI E1 lines (30B+D). Enables handling the
differences between the newer QSIG standard (ETS 300-172) and other
ETSI-based standards (ETS 300-102 and ETS 300-403) in the conversion of
B-channel ID values into timeslot values:
In ‘regular ETSI’ standards, the timeslot is identical to the B-channel ID
value, and the range for both is 1 to 15 and 17 to 31. The D-channel is
identified as channel-id #16 and carried into the timeslot #16.
In newer QSIG standards, the channel-id range is 1 to 30, but the timeslot
range is still 1 to 15 and 17 to 31. The D-channel is not identified as
channel-id #16, but is still carried into the timeslot #16.
When this bit is set, the channel ID #16 is considered as a valid B-channel
ID, but timeslot values are converted to reflect the range 1 to 15 and 17 to
31. This is the new QSIG mode of operation. When this bit is not set
(default), the channel_id #16 is not allowed, as for all ETSI-like standards.
ISDNOutCallsBehavior
[Outgoing Calls Behavior]
1024 = Numbering plan / type for T1 IP
Æ
Tel calling number are defined
according to the manipulation tables or according to RPID header (default).
Otherwise, the Plan / type for T1 calls are set according to the length of the
calling number
ISDNIBehavior_x
[Q.931 Layer Response
Behavior]
Same as the description for parameter ‘ISDNBehavior’ for a specific trunk ID
(x = 0 to 7)
ISDNInCallsBehavior_x
[Incoming Calls Behavior]
Same as the description for parameter ‘ISDNInCallsBehavior’ for a specific
trunk ID (x = 0 to 7)
ISDNOutCallsBehavior_x
[Outgoing Calls Behavior]
Same as the description for parameter ‘ISDNOutCallsBehavior’ for a specific
trunk ID (x = 0 to 7)
Channel Parameters
The Channel Parameters define the DTMF, fax and modem transfer modes. See Fax &
Modem Transport Modes for a detailed description of Fax and Modem transfer modes; see
Configuring the DTMF Transport Types for detailed description on DTMF transport modes.
The Default Channel Parameters are applied to all V7122 channels.