manualshive.com logo in svg

3Com TP-1610, Руководство пользователя

Поделиться
Скачать
3Com TP-1610 Скачать руководство пользователя страница 294

294 

V6100 and V7122 User Guide

 

Secret Tables 

A table is defined as a secret table if it contains at least a single secret data field or if it 
depends on another secret table. A secret data field is a field that mustn’t be revealed to the 
user. For example, in the IPSec application, IPSec tables are defined as secret tables as the 
IKE table contains a pre-shared key that must be concealed. Therefore, the SPD table that 
depends on the IKE table is defined as a secret table as well. 

There are two major differences between tables and secret tables: 

ƒ

 

The secret field itself cannot be viewed via SNMP, Web or any other application. 

ƒ

 

ini

 file behavior: Secret tables are never displayed in an uploaded 

ini

 file (e.g., when 

performing a 'Get 

ini 

File from Web' operation). Instead, there is a commented title that 

states that the secret table is present at the gateway and is not to be revealed. 

 

Secret tables are always kept in the gateway’s non-volatile memory and can be over-
written by new tables that are provided in a new 

ini 

file. If a secret table appears in an 

ini

 

file, it replaces the current table regardless of its content. To delete a secret table from 
the gateway, provide an empty table of the same type (with no data lines) as part of a 
new 

ini

 file; the empty table replaces the previous table in the gateway. 

Using the ini File to Configure Parameter Tables 

You can use the 

ini

 file to add / modify parameter tables. When using tables, Read-Only 

parameters are not loaded, as they cause an error when trying to reload the loaded file. 
Therefore, Read-Only parameters mustn’t be included in tables in the 

ini

 file. Consequently, 

tables are loaded with all parameters having at least one of the following permissions: Write, 
Create or Maintenance Write. 

Parameter tables (in an uploaded 

ini

 file) are grouped according to the applications they 

configure (e.g., NFS, IPSec). When loading an 

ini

 file to the gateway, the recommended 

policy is to include only tables that belong to applications that are to be configured (Dynamic 
tables of other applications are empty, but static tables are not). 

The 

ini

 file includes a Format line that defines the columns of the table to be modified (this 

may vary from 

ini

 file to 

ini

 file for the same table). The Format line must only include 

columns that can be modified (parameters that are not specified as Read-Only). 

An exception is Index-fields that are always mandatory. In the example provided in 

Table 64

, 

all fields except for the ‘Time Connected’ field are loaded. 

Содержание TP-1610

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды