76
V6100 and V7122 User Guide
Access the CLI
To access the CLI via the Embedded Telnet Server:
1
Enable the Embedded Telnet Server:
a)
Access the V7122 Embedded Web Server (see
Accessing the Embedded Web
Server
).
b)
Set the parameter ‘Embedded Telnet Server’ (under
Advanced Configuration
>
Network Settings
>
Application Settings
) to ‘Enable (Unsecured)’ or ‘Enable Secured
(SSL)’.
c)
Click
the
Reset Device
button on the main menu bar; the Reset screen is displayed.
d)
Click
the
Reset
button in the middle of the Reset screen with the Burn option
selected; the V7122 is shut down and re-activated. A message about the waiting period
is displayed. The screen is refreshed.
2
Use a standard Telnet application to connect to the V7122 Embedded Telnet Server.
Note that if the Telnet server is set to SSL mode, a special Telnet client is required on
your PC to connect to the Telnet interface over a secured connection.
3
Login using the username (‘Admin’) and password (‘Admin’).
To access the CLI via the RS-232 port:
1
Connect the RS-232 port to your PC (For the V7122, see
Connecting the RS-232 Port to
Your PC
. For the V6100 see
Connecting the V6100 RS-232 Port to Your PC
).
2
Use serial communication software (e.g., HyperTerminal
TM
) to connect to the V7122.
Set your serial communication software to the following communications port settings:
Baud Rate:
115,200 bps
Data
bits:
8
Parity:
None
Stop
bits:
1
Flow
control:
None
The CLI prompt is available immediately.
Assign an IP Address
To assign an IP address via the CLI:
1
At the prompt type ‘conf’ and press enter; the configuration folder is accessed.
2
To check the current network parameters, at the prompt, type ‘GCP IP’ and press enter;
the current network settings are displayed.
Содержание TP-1610
