manualshive.com logo in svg

3Com TP-1610, Руководство пользователя

Поделиться
Скачать
3Com TP-1610 Скачать руководство пользователя страница 2

2 

V6100 and V7122 User Guide

 

3Com Corporation, 350 Campus Drive, Marlborough MA 01752-3064 

Copyright © 2006, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or 
used to make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.

 

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on 
the part of 3Com Corporation to provide notification of such revision or change.

 

3Com Corporation provides this documentation without warranty, term, or condition of any kind, either implied or expressed, including, but 
not limited to, the implied warranties, terms, or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. 3Com 
may make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time.

 

If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the 
product as a separate document, in the hardcopy documentation, or on the removable media in a directory file named LICENSE.TXT or 
!LICENSE.TXT. If you are unable to locate a copy, please contact 3Com and a copy will be provided to you.

 

UNITED STATES GOVERNMENT LEGEND

 

If you are a United States government agency, then this documentation and the software described herein are provided to you subject to 
the following:  

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as 
“Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) 
and as such is provided with only such rights as are provided in 3Com’s standard commercial license for the Software. Technical data is 
provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. 
You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered 
to you in conjunction with, this guide.

 

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other 
countries.

 

3Com, the 3Com logo, NBX, and SuperStack are registered trademarks of 3Com Corporation. NBX NetSet, pcXset, and VCX are 
trademarks of 3Com Corporation.

 

Adobe is a trademark and Adobe Acrobat is a registered trademark of Adobe Systems Incorporated. Microsoft, Windows, Windows 2000, 
Windows NT, and Microsoft Word are registered trademarks of Microsoft Corporation.   

All other company and product names may be trademarks of the respective companies with which they are associated. 

Содержание TP-1610

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды