3Com S7906E - Switch, Руководство по настройке

Страница: 263 / 2621

1-12
To do… Use the command… Remarks
Enter system view system-view —
Enter the interface view of the
monitor port
interface interface-type interface-number —
For an access
port
port access vlan vlan-id
For a trunk port port trunk permit vlan vlan-id
Assign the
port to the
probe VLAN
For a hybrid
port port hybrid vlan vlan-id { tagged |
untagged }
Required
Use one of the
commands
For more information about the port access vlan command, the port trunk permit vlan command,
and the port hybrid vlan command, see VLAN Commands in the Access Volume .
Configuring Layer 3 Remote Port Mirroring
Layer 3 Remote Port Mirroring Configuration Task List
To configure Layer 3 remote port mirroring, you need to create a local port mirroring group on the
source device as well as on the destination device, and configure mirroring port and the monitor port for
each mirroring group. The source and destination devices are connected by a tunnel.
z
On the source device, you need to configure the port you want to monitor as the mirroring port, and
configure the tunnel interface as the monitor port.
z
On the destination device, you need to configure the physical port corresponding to the tunnel
interface as the mirroring port and configure the port that connects the data monitoring device as
the monitor port.
Complete these tasks to configure Layer 3 remote port mirroring:
Task Remarks
Configuring Local Mirroring Groups Required
Configuring Mirroring Ports for a Local
Mirroring Group
Required
Configuring the source
device
Configuring the Monitor Port for a Local
Mirroring Group
Required
Configuring Local Mirroring Groups Required
Configuring Mirroring Ports for a Local
Mirroring Group
Required
Configuring the
destination device
Configuring the Monitor Port for a Local
Mirroring Group
Required