3Com S7906E - Switch, Руководство по настройке

Страница: 1721 / 2621

1-72
Reply from 192.168.2.2: bytes=56 Sequence=5 ttl=253 time=36 ms
--- 192.168.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 36/52/61 ms
[CE2] ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=253 time=38 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=253 time=61 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=253 time=74 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=253 time=36 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=253 time=35 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 35/48/74 ms
The sample output shows that CE 1 and CE 2 can reach each other.
7) Verify the configuration
Perform the
display mpls lsp verbose
command on PE 1. You can find an LSP with LspIndex 2050.
This is the LSP, that is, the MPLS TE tunnel, established using RSVP-TE.
[PE1] display mpls lsp verbose
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
No : 1
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel1
Fec : 3.3.3.3/32
Nexthop : 10.0.0.2
In-Label : NULL
Out-Label : 3
In-Interface : ----------
Out-Interface : Vlan-interface2
LspIndex : 2050
Tunnel ID : 0x22004
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
Mpls-Mtu : 1500
No. : 2
IngressLsrID : 3.3.3.3
LocalLspID : 1
Tunnel-Interface : Tunnel1