3Com S7906E - Switch, Руководство по настройке

Страница: 729 / 2621

1-18
z
Configure the IS level of all routers as Level-1 or Level-2 and don’t configure different levels in this
case because there is no need for all routers to maintain two identical LSDBs;
z
Configure the IS level as Level-2 on all routers in an IP network for scalability.
For an interface of a Level-1 (or Level-2) router, the circuit level can only be Level-1 (or Level-2). For an
interface of a Level-1-2 router, the default circuit level is Level-1-2; if the router only needs to form
Level-1 (or Level-2) neighbor relationships, you can configure the circuit level for its interfaces as
Level-1 (or Level-2) to limit neighbor relationship establishment.
Follow these steps to configure the IS level and circuit level:
To do… Use the command… Remarks
Enter system view system-view ––
Enter IS-IS view
isis [ process-id ]
[ vpn-instance
vpn-instance-name ]
––
Specify the IS level
is-level { level-1 | level-1-2 |
level-2 }
Optional
The default is Level-1-2.
Return to system view quit ––
Enter interface view
interface interface-type
interface-number
––
Specify the circuit level
isis circuit-level [ level-1 |
level-1-2 | level-2 ]
Optional
The default is Level-1-2.
Configuring the Network Type of an Interface as P2P
Interfaces with different network types operate differently. For example, broadcast interfaces on a
network need to elect the DIS and flood CSNP packets to synchronize the LSDBs, while P2P interfaces
on a network need not elect the DIS and have a different LSDP synchronization mechanism.
If there are only two routers on a broadcast network, you can configure the network type of attached
interfaces as P2P to avoid DIS election and CSNP flooding, saving network bandwidth and speeding up
network convergence.
Follow these steps to configure the network type of an interface:
To do… Use the command… Remarks
Enter system view system-view ––
Enter interface view
interface interface-type
interface-number
––
Configure the network type for the
interface as P2P
isis circuit-type p2p
Optional
By default, the
network type of an
interface depends
on the physical
media. The network
type of a VLAN
interface is
broadcast.